The difference in design with the padded v-hull is that where the point of the vee would be on the bottom of a plain v-hull there is a flat area ranging from six to ten inches wide. when looking at a padded v-hull from underneath, the front of the hull shows a vee which slowly starts to taper and blend back to the flat pad area.. Vee hull design secrets, vee pad design, porpoising, chine walk, free powerboat articles (opc) or recreational vees, including modified vee style hulls & vee-pad hulls, bass boats, even rc performance models. any size, speed and setup conditions are all accounted for by the software.. Vbdp -design and analyze the performance of your vee hull or vee-pad hull; with all the features of tbdp. optimize your vee hull and vee-pad performance the easy way! technical, design and performance articles on many subjects for tunnel boats, vee hulls and vee-pad hulls. all the articles, papers are free..
On a bass boat that's not a hook, that's a pad. most bass boats had a pad just forward of the transom, which at top speed becomes pretty much all the boat is riding on. what you might want to do is adjust the height of the outboard on the transom. try lowering it an inch and see if the problem goes away.. There is a difference and xpress boats is building high-performance bass boats, not just fishing boats. building a pad-designed hull is difficult to accomplish and takes precise engineering. welding of the boat by many manufacturers is done in a die used to hold the two bottom parts together.. Dupo marine center is a dealer for a variety of boat manufacturers: basscat, skeeter, and polarkraft. dupo marine center has been in the st. louis metro area since 2006. owners robert smith and monty cordray are well trained in all aspects of boats and other watercraft as well as service and engine repair..
0 comments:
Post a Comment
Note: only a member of this blog may post a comment.